FJ40 Rear Tube Fenders



Rear Tube Fender Flares









Started with a 1.5" ERW outer tube frame and skinned with the 14 gauge sheet.  
 






The outer edge is tacked to the top radius of the tube frame.  Then inner edge that mounts to the body has a 1" break and was relief cut in order to bend with the tube.
 FJ40 Tube Fender Flare
 FJ40 Rear Tube Fender Flares  








Another view from the rear before finishing the welds.









View of the rear welded and ground down.
 FJ40 Rear Tube Fender Flares
 FJ40 Rear Tube Fender Flares  







Front view welded and ground.